The Wondrwall Light Switch has six LEDs that make up its status bar. This article explains the meanings behind different combinations of the LEDs.
The Wondrwall Light Switch is equipped with a status bar comprised of six LEDs. These LEDs are designed to provide information on the status of the switch, making it easy for users to identify its current state.
The table below outlines the LED sequence for a commissioned Light Switch.
| Fully Commissioned Light Switch Boot Sequence | |
| Status | Diagnostic LED pattern |
| Booting 1st phase | All LEDs Solid |
| Booting 2nd phase | 2-6 Solid |
| Booting 2nd phase WiFi connected | 3-6 Solid |
| Booted | All off |
The table below outlines the LED sequence for an uncommissioned Light Switch.
| Uncommissioned Light Switch Boot Sequence | |
| Status | Diagnostic LED pattern |
| Booting 1st phase | All LEDs Solid |
| Booting 2nd phase | 2-6 Solid |
| Booted uncommissioned | 2 Solid, 4 flashing, all others off |
Below is a list of error states and their respective LEDs.
| Error States | |
| Status | Diagnostic LED pattern |
| WiFi network missing | 2 Flashing 3-6 Solid |
| No Internet | 5 Flashing 3,4 and 6 Solid |
| Alexa not enabled | 3 and 6 Solid |
| Recovery Mode | 1, 3 and 6 |