A guide explaining how to add additional Wondrwall Light Switches to the home.
Follow these step-by-step instructions to pair additional light switches and expand your home automation network.
1. Accessing the Device Menu
- From the home screen, navigate to the menu (represented by three horizontal lines in the top left).
- Select “Devices” from the menu options.
2. Adding a New Light Switch
- Tap the add icon (usually located in the top right corner of the screen). This action will take you to the add device screen.
- Choose “Light Switch” from the list of available devices.
- Follow the instructions displayed in the app.
3. Removing the Light Switch Cover
- Gently remove the light switch cover:
- Place your palm on the device.
- Wrap your fingers around the cover.
- Gently pull either the left or right side of the light switch to unclip the cover.
- If you encounter difficulty, use a card (like a credit card) to slide between the cover and the device. Start at one of the top corners and run it down the side until the cover comes off.
4. Pressing the Functional Button
- Locate the functional button on the light switch.
- Hold down the button until the top three touch sensor LED lights start flashing.
5. Device Pairing Process
- Press “Next” to begin the search for the device.
- Once the device is found, the app will display “configuring device.”
- Wait patiently until the device has successfully paired.
6. Configuring the Light Switch
- The screen will prompt you to:
- Choose an existing location or create a new one for your light switch.
- Name the device.
- Next, configure the connected lights:
- Select from the following options:
- Not connected (for 2-way lighting)
- Single left (only the left-hand button turns on lights)
- Single right (only the right-hand button turns on lights)
- Double (both left and right buttons turn on lights, but not the middle)
- All connected (all buttons turn on lights)
- Select from the following options:
7. Completing the Setup
- Press “Finish” if you’re done adding light switches, or “Add another device” if you want to pair more switches.
- The light switch will perform an update (indicated by scanning status lights).
8. Repeat for All Light Switches
- Repeat these steps for each additional light switch you want to pair in your home.