A step-by-step guide on how to pair your Wondrwall thermostat.
Introduction
The Wondrwall Thermostat is a low-powered ZigBee device that controls conventional household heating and cooling systems. It offers manual operation through its screen and buttons, along with wireless access to the Wondrwall Energy Management System via the Wondrwall Light Switch.
This guide will walk you through the process of pairing a thermostat to the Wondrwall system.
Thermostat Versions
Wondrwall offers two models of thermostats, referred to as Version 1 (V1, 24V, low voltage) and Version 2 (V2, 240V, high voltage). The process for adding each version is slightly different and is detailed below.
Version 1 (V1):
Version 2 (V2):
Before you begin, ensure that the primary Wondrwall light switch is online and has completed any updates.
You can still use the heating manually before adding the device. Simply set a temperature and the thermostat will hold it.
Steps to Pair the Thermostat
Navigate to the Device Selection page in the Wondrwall app by pressing the Menu from the homepage and selecting Devices. Then select Thermostat from the list. If you cannot see the thermostat on the list, try scrolling down.
Put the Thermostat into Pairing Mode by following the instructions on the screen to put the device into pairing mode. If the model displayed is not what you have installed, press the ‘my thermostat doesn’t look like this’ text to swap models.
For V1:
Cycle the Thermostat to display OFF, using the MODE button.
Press and hold the space between HOLD and FAN buttons and swipe down the right-hand slider. The screen should display 01. You can now release HOLD.
Using the slider, set the number to 12 and press the HOLD button. Then set the number to 01, press HOLD, and then the MODE button. There should now be a green wireless symbol flashing on the screen.
For V2:
Press and hold the + button on the thermostat for 10 seconds, until Joi NET is displayed on the thermostat screen. Once Joi NET is visible, release.
Press Next on the Wondrwall App Screen to continue. A search for the device will now begin.
If the device has been found:
- For V1, you should notice the green wireless symbol now goes solid.
- For V2, you will notice the no network symbol disappear.
Once the pairing process has finished, please select the location for the Thermostat, then name the device. Your Thermostat will now appear in your list of devices.
For more information on how to schedule devices, refer to our scheduling article.
To learn how to heat a home efficiently, read our article on this topic.
If you have any questions or need further assistance, feel free to contact our support team.