The Wondrwall Siren uses wireless technology to provide an audible alert in case of potential threats or emergencies. The siren is a valuable part of the Wondrwall system, offering peace of mind and enhanced home protection.
Key Points:
- The Wondrwall siren features a waterproof case and is designed for installation on the exterior wall of the property.
- It connects to the system wirelessly and operates on battery power.
- The package includes three wall plugs and screws necessary for mounting the siren on the wall.
- Mount the siren in a visible location where the strobe light can easily draw attention when the alarm is triggered.
- Remove the cover by loosening the bottom screw (A).
- Carefully pull the cover from the bottom until it clears the screw and remove it.
- Turn the battery switch to ON (C).
- Mount the siren by holding the base against the desired location, marking and drilling three mounting holes (B), and inserting wall plugs.
- Securely screw the siren base to the wall, ensuring the tamper switch (D) is fully depressed. Use suitable spacing material if needed.
- Replace the cover by hooking the lip at the top over the base.
- Carefully push the bottom of the cover towards the base, allowing the bottom screw to slide into the cover’s slot (E).
- Tighten the bottom screw.
|
|
WARNING: As previously stated, this installation will require working at height, so ensure that Health and safety is followed at all times. |
If you have any issues which cannot be solved using our Support Hub, please don't hesitate to contact the Wondrwall Support Team for further assistance.